The pump behind the Sahand tractor of Tabriz is used to transfer water and sewage. These pumps were produced for the first time in Iran by Germany's KSB, and their tests and use in different parts of Iran with different altitudes above sea level are approved by consumers and serve farmers, industrialists, and organizations. To use the pump behind the tractor, we need to use a booster gearbox, which is known as the gearbox behind the tractor. The pump behind the tractor can be installed on the back of the tractor by a chassis with a special design, which is blocked with the increasing gearbox (gearbox behind the tractor) with the ability to transport. It is easy and capable of pumping at a high height and with high drainage and without the need for electricity. The pump behind the tractor is used as a centrifugal pump with 1450 and 2950 revolutions, and it is possible to achieve the maximum height and drainage with the minimum time with the power of the tractor. It provides and prevents the occurrence of physical injuries for users.
Tabriz Pump Pump High Press Pump
High pressure horizontal centrifugal pump with impellers between bearings, separate motor, multi-stage and housing with radial cuts. Each floor is sealed by o-rings. The floors are connected to each other by floor screws. The pump support bases are integrally cast with the suction and thrust chamber.
Tabriz Pump Pump Pump Applications
flower pump
The Sahand Tabriz flower pump is a horizontal centrifugal type, with a spiral chamber, one floor, one overhanging impeller, separate motor with single central suction.
Applications of flower pump 1. Pumping liquids such as drilling mud 2. Muddy water (with sand) 3. Slurry of construction materials, solution of wax 4. Mixture of heavy petroleum materials 5. Used in paper making, sugar and detergent industries Due to centrifugal pumps such as water supply and irrigation and pumping of light chemicals